Cooper Security 9651 Podręcznik Użytkownika Pobierz pdf (Strona 22)

4. Special Functions

Page 22 11980075

Testing Zones

You can set the system so that it will allow you to walk around and test each

of the detectors (a walk test). Do this when the premises are empty to avoid

other people triggering movement detectors before you do, which would

confuse the results of the test. If a detector fails the test, contact your alarm

company and ask them to check the system.

Notes:

1. You can abandon the test at any time by pressing y.

2. You cannot test 24-hour zones (including Fire and PA) or tamper circuits with this

command. If you wish to test them, contact your alarm company.

To test zones:

1. Key in an access code (or present a tag).

2. Press 9.

This display shows:

Walk Test

3. Walk around your premises and trigger the

detectors in turn (excluding 24-hour and PA

zones).

When you trigger a detector, the keypad and

internal sounder give a short tone.

The display shows 'A' for alarm, followed by the

zone number of the detector.

If you trigger more than one detector, the display

shows the zone numbers in turn.

A: Zone 02

Press y to stop the test when you have triggered

all the detectors.

Setting up Users

Note: Only the master user (U01) can set up users.

The system can store up to 50 different user access codes. For security, you

should give one code to each person who has responsibility for setting and

unsetting the system: do not allow users to share codes.

To distinguish users and conceal their access codes, the log shows each user

as a number (for example, U02). You can store a user name for each access

code, which is visible when the code is modified but not displayed or logged.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Brak uwag

Cooper Security 9651 Podręcznik Użytkownika Strona 22