Cooper Security Homelink 75 Instrukcja Użytkownika Pobierz pdf (Strona 23)



Reset All Exit

Reset Required

P2:Burg Z02 Alarm

The siren stops and the screen

shows the ﬁrst zone to cause

the alarm, for example:

EITHER The display returns to

normal.

Continued on next page.

Do this: The display shows:



In an alarm the control unit gives a tone from the siren (except for medical alarms) and shows a small

“Alert” icon ( ) at the bottom right of the display. The siren runs for a limited time set by the installer (a

maximum 20 minutes for intruder and PA alarms).

If you return to the system after the siren has stopped then the

icon on the display tells you that an

alarm has occurred. Press the right hand softkey to see information about the alarm. If you return to the

system while the siren is running you can silence the siren as follows:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Brak uwag

Cooper Security Homelink 75 Instrukcja Użytkownika Strona 23