Cooper Security i-on 16 Podręcznik Użytkownika Pobierz pdf (Strona 50)

Programming i-on16

Page 46

Speech Dialler

Deals with recording speech messages, selecting the

alarm types that will trigger them, and selecting

destinations for the messages.

Line Fail Reporting

Allows you to select how the control unit reports a

communications failure if either the PSTN or the I-

SD01 fails.

The control unit is designed to alert the user if it fails to

complete a programmed communication. If alarm

reporting fails then the keypad displays an alert by

lighting the red LEDs around the navigation keys.

Although the user may acknowledge the alert, the control

unit will not remove the alert until the I-SD01

successfully completes its communication.

If an I-SD01 report fails then the control unit reports an

alert at the keypad, but the user can clear the alert by

entering their access code and acknowledging the alert.

If you wish to remove an I-SD01 from a system,

ensure that you first set the call mode in both the Alarms

and Speech Dialler menus to Disabled. Otherwise the

control unit will continually report PSTN failure.

Alarms (ARC Reporting)

To program how the control unit will communicate with

an ARC select Reporting, Alarms.

Call Mode

To choose the call mode for communicating with an ARC

select: Reporting – Alarms – Call Mode. The call modes

available are:

Disabled.

The control unit disables all ARC communications.

Single.

The control unit reports to the first telephone number

in the Phone Book, using a single account number

(see "Account Numbers" on page 47).

Operation: The control unit dials the number and

attempts to connect with the ARC. If the call fails, the

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Brak uwag

Cooper Security i-on 16 Podręcznik Użytkownika Strona 50