Cooper Security Homelink 75 Przewodnik Instalacji Pobierz pdf (Strona 19)

Administration

Page 19

Test

If you think that part of the system is not working

correctly then you can use the Test option to test various

peripherals. If the test confirms that part of the system is

not working then contact your installer.

The Test option also lets you check the identity of

Telecommands, Pendants and Tags.

To start testing, make sure the system is idle then:

1. Enter the User Menu and select Test.

The display shows the Test menu.

2. Select the part of the system that you wish to test.

You can test each part listed in the Test menu as follows:

Siren Press On/Off to turn the siren on and off

again. The word "On" or "Off" at the top

right of the display shows whether you

should be hearing the siren.

Loudspeaker Press On/Off to play a test message from

the loudspeaker. The word "Playing"

appears at the top right of the display

when you should be hearing the message.

Keypad Press each key once. The display shows a

character in response. Press both dual

keys together to test. Press OK to end the

test.)

Walk test The display shows a list of all the

detectors installed on the system. Walk

round and trigger each detector. Every

time you trigger a detector the control

unit gives a double tone and the display

shows an "A" at the end of the line for

that detector. Note that you cannot test

24 hour or fire zones.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Brak uwag

Cooper Security Homelink 75 Przewodnik Instalacji Strona 19