Cooper Security M800 Podręcznik Użytkownika Pobierz pdf (Strona 21)

19

AUXILIARY X TAMP

12:00 Sun 01 JAN

The control unit has auxiliary tamper zones

for monitoring auxiliary devices. The lid of a

device has been removed. You may not

be able to set your system until the fault is

cleared. Contact your alarm company.

BELL TAMPER

12:00 Sun 01 JAN

The lid of the external sounder has been

removed. You may not be able to set your

system until the fault is cleared. Contact

your alarm company.

TEST CCTS FAILED

12:00 Sun 01 JAN

One or more zones failed during a test

routine initiated by your alarm company.

You can still set and unset your system but

you should contact your alarm company.

WARDS ISOLATED

12:00 Sun 01 JAN

One or more wards have been isolated to

enable access to areas with 24-hour

protection. Press [ to identify the isolated

wards.

TAMPER 0001

Office Window

This message is displayed when a zone's

tamper circuit has been activated.

CALL ENGINEER TO

RESET SYSTEM

An engineer code or remote reset code

needs to be entered to reset the system.

Reset Required

See CALL ENGINEER TO RESET SYSTEM.

RING A.R.C. FOR

REM. RESET CODE

You need to contact an Alarms Receiving

Centre for a remote reset code (see page

16).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag