Cooper Security M800 Podręcznik Użytkownika Pobierz pdf (Strona 22)

20

Other Messages

SERVICE REQUIRED

12:00 Sun 01 JAN

The alarm system requires a routine

maintenance visit. You can still set and

unset your system but you should contact

your alarm company.

RELEARN REQUIRED

12:00 Sun 01 JAN

The hardware configuration of your alarm

system has changed. You may not be able

to set your system. Contact your alarm

company.

HI SECURE UNSET

12:00 Sun 01 JAN

The alarm system has a high-security

feature that can be applied to any ward.

When the ward is unset, the keypads show

this message and the high-security timer

1

is

started. Every time a zone is activated in

the selected ward, the timer is reset. If no

zones in the ward are activated before the

timer expires, the ward is automatically set

and the message is cleared.

CODE TAMPER

KEYPAD LOCKED !

This message is displayed when a keypad is

locked out after too many invalid code

entries. After five minutes, the message

clears and the keypad unlocks itself.

! AUTO SETTING !

12:00 Sun 01 JAN

The panel has an auto-set feature that

automatically sets and unsets specified

wards at pre-defined times, This message is

displayed one minute before the wards are

scheduled to set and a chime is emitted

every ten seconds to warn you to leave the

area. If you have the appropriate user

code, you can delay automatic setting by

1

Engineer option 1-5-2

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag