Cooper Security 9751 Podręcznik Użytkownika Pobierz pdf (Strona 9)

496661 9

To part set:

1. Close doors and windows in the protected area.

2. Key in your access code at the keypad.

3. Press B (or C).

The keypad starts the quiet

Part Set exit tone (see

"Instant Set").

Note: Some Levels on your system may be programmed for Silent Set. When

setting these Levels the system does not give any tones from the keypads or

internal sounder.

4. Leave via the designated exit route and if necessary close the final door.

The exit tone stops and the

system sets. The system

gives a double "beep" and

the keypad display shows

which Level is set.

Instant Set

The area protected by a part set system may not need an exit route or final

exit door. For these areas the Installer may program the B or C keys as

Instant Set. With Instant Set the system sets as soon as you press B or C.

The system gives a double "beep" to show that it is set.

Note:Instant set is not available for key A (Full Set).

Keyswitch Setting

1. Close all doors and windows.

The Ready lamp on the

keyswitch should be glowing

to indicate that all the detec-

tors are closed. (Some types

of keyswitch do not have

lamps.)

2. Either turn the keyswitch to "Full" to set Level A

Or turn the keyswitch to "Part" to set Level B.

3. Leave the premises and close the final door.

The system gives a double

"beep" and sets. The Armed

lamp glows.

2. Everyday Operation

Part Set

Exit Tone

"beep beep"

Off

Armed

Ready

Full

Part

Off

Armed

Ready

Full

Part

Off

Armed

Ready

Full

Part

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Cooper Security 9751 Podręcznik Użytkownika Strona 9

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Cooper Security 9751