Cooper Security i-on40 Instrukcja Użytkownika Pobierz pdf (Strona 14)

i-on40

Page 10

2. Alarms

The i-on40 normally starts an alarm when it receives an alarm

signal from one of its detectors. In addition, you can start a panic

alarm from the keypad. The table below shows the different kinds

of alarms possible.

Type of

Alarm

Signal

(see note)

Started by:

Intruder Loud warbling

tone from

siren.

Normal alarm or entry route zone

activated when system is set.

24 hour zone activated at any time.

Fire Pulsing tone

from siren.

Fire zone activated at any time.

Panic Loud warbling

tone from

siren

PA zone or Panic Alarm transmitter

activated at any time.

Pressed on keypad.

(The installer must enable this

feature on your system.)

Technical Loud warbling

tone from

siren.

Technical alarm zone activated at

any time.

Silencing an Alarm

In an alarm the i-on40 operates the sirens. The sirens run for a

limited time set by the installer (a maximum 15 minutes for

intruder and panic alarms).

If you return to the system while the sirens are running you can

silence the siren as follows:

1. Key in your access code (or

present your tag to the

keypad)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Cooper Security i-on40 Instrukcja Użytkownika Strona 14

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Cooper Security i-on40