Cooper Security i-on40 Instrukcja Użytkownika Pobierz pdf (Strona 22)

Administration i-on40

Page 18

On the bottom line of the display “Yes” means that the user

is assigned to the partition, “No” means that the user is not

assigned to the partition.

3. Press > to change the “Yes” to a “No” or back again.

See page 3 for a description of partitions.

Note: You cannot change User 01’s partitions. User 01 always

belongs to all partitions.

Access Code

To change a user’s access code:

1. Enter the Menu and select Users - Edit User - User(nn) - Code.

2. Key in an access code for the user.

When you press the last digit of the access code the display

asks you to key in the same access code again.

3. Key in the same digits again, in the same order.

Access codes are four digits long.

Proximity Tags

To allocate a proximity tag to a user:

1. Enter the Menu and select Users - Edit User - User(nn) - Prox Tag.

Note: If the user already has a prox tag allocated to them then

the screen will display “Delete Prox Tag?”. See page 20.

The display asks you to present a tag to the front of the

keypad.

2. Hold the tag up close to the front of the keypad.

The control unit learns the identity of the tag.

You cannot register more than one tag per user. If you

present a tag that the control unit has already registered to

another user then you will hear a single low tone, the display

will tell that the tag is already in use and will then revert to

asking you to present the tag.

If you do not wish to register a tag for the user then press X.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Brak uwag

Cooper Security i-on40 Instrukcja Użytkownika Strona 22