Cooper Security i-on40 Instrukcja Użytkownika Pobierz pdf (Strona 33)

i-on40 Administration

Page 29

8. Press Y to confirm your choices.

Deleting Remote Controls

If a user has lost a remote control you should delete it from the

system to make sure that no unauthorised person can use it to

gain access. Also, if you wish to reassign a device to another

user, you must first delete it from the system.

1. Enter the Menu and select System Config – Remotes – Delete.

The display shows a message asking you to identify the

remote control you wish to delete by pressing a button on it.

2. Press a button on the device that you wish to delete.

Note: If you do not have the device select press

The display shows a list of the known devices.

Select the device you wish to delete.

The display shows the details of the device you have

selected.

3. Press Y to confirm that you wish to delete the device.

The control unit will let you delete all remote controls in one

operation. Think carefully before you use this feature.

1. Enter the Menu and select System Config - Remotes - Delete All.

The display asks you for confirmation.

2. Press Y.

The control unit "forgets" all remote controls that were

registered to it.

To register remote controls with users once again enter the Menu

and select Users - Edit User (see page 19).

Starting a Call To Downloader

Your installer may be using a personal computer connected to the

telephone network in order to program your alarm system. The

software the Installer uses to program your alarm system is

called Downloader.

There may be times when your Installer asks you to make your

alarm system start a telephone call out to the installer's

1 2 ... 28 29 30 31 32 33 34 35 36

Brak uwag

Cooper Security i-on40 Instrukcja Użytkownika Strona 33