Cooper Security Homelink 75 Podręcznik Użytkownika Pobierz pdf (Strona 29)

7510r Programming Reference - Outputs

Page 25

Note: If you press DELETE until the current name has

disappeared from the display, and then press DELETE

once more, the display leaves the name change

screen and restores the name of the output to its

previous value.

Output Types

For all outputs (hardwired and radio) the types available

are:

Not Used:

The control unit will not operate any output assigned

to this type.

Siren

The control unit operates this output during an alarm.

See page 42 to choose the siren delay and duration.

In a partitioned system the control unit operates this

output when any partition is in alarm.

E/E Follow

This output is active when the entry or exit time

starts and deactivates at the end of the entry/exit

time, or if the entry/exit time is terminated. The

output can be used for a separate entry/exit buzzer.

Note that the output does not operate if the exit

mode is silent set or instant set.

Armed lamp

The output is active continuously while the system is

full or part set.

24 Hour

This output is active when the control unit starts a 24

hour alarm.

Strobe

The control unit operates this output type during an

alarm. The output remains active until the user

disarms the system.

Strobe Set

This output is active for 10 seconds after the system

(or any Partition) has set. The output can be used to

operate the strobe to give a visual indication that the

system has completed setting. This output type also

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

Brak uwag

Cooper Security Homelink 75 Podręcznik Użytkownika Strona 29