Cooper Security Homelink 75 Podręcznik Użytkownika Pobierz pdf (Strona 77)

7510r Programming Reference - Social Care

Page 73

Primary Telecoms

This option allows you to choose which communication

link the control unit will use first. If you select PSTN the

control unit will always try to report on the PSTN line

first, followed by any plug on module if the PSTN line

fails.

If you choose Plug On then the control unit will try to use

any plug on module to report alarms, and use an

attached PSTN line if the plug on module fails.

Social Care

The Social Care option lets you program how the control

unit uses any zones given the Activity Monitoring zone

attribute (see page 22). If you wish the control unit to

report a Social Care Alarm to a telephone number see

page 62.

Start Monitoring At/End Monitoring At

You may not need a person or area to be monitored for

the entire day. If you wish to limit Activity Alarm

monitoring to a specific part of the day then select Social

Care Alarms, Start Monitoring At

to specify the start of the

period, and Social Care Alarms, End Monitoring At to specify

the end of the period.

When the control unit is monitoring an Activity Zone, the

display shows a small icon (

) in the top right hand

corner.

Monitoring Interval

If an Activity Alarm zone shows no activity for any time

longer than the Monitoring Interval, then the control unit

starts a social care alarm. To change the Monitoring

Interval select

Social Care Alarms, Monitoring Interval

Set Volume

During a Social Care Alarm the control unit can open a

speech path from the control unit to the called telephone

(see page 62). The control unit plays speech from the

telephone out through loudspeaker. The person at the

called telephone can listen to any replies through the

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83 84

Brak uwag

Cooper Security Homelink 75 Podręcznik Użytkownika Strona 77