Cooper Security Homelink 75 Podręcznik Użytkownika Pobierz pdf (Strona 65)

7510r Programming Reference - Reporting

Page 61

control unit to make a static test call at 6:00pm every

day.

To make test calls on one day every month select

Reporting, Alarms, Static Test Call, Monthly. From the display

select a number between 1 and 31 to specify the day of

the month on which the call should take place. The

control unit will make a test call at 1am on the selected

day.

Note that the control unit will add or subtract up to 16

minutes at random to the time you specified. This is to

make sure that the ARC is not overwhelmed with a flood

of test calls from systems that have all been given the

same time.

Select

Reporting, Alarms, Static Test Call, Disabled

to disable

static test calls.

Burg Comms Rearm

This menu option determines what the control unit does

with the “Burg” Fast Format channel 3 at the end of the

siren run time. There are two options:

Disabled

The channel stays active until an Installer or user

resets the system.

Enabled

The system rearms Channel 3 once the siren timer

has expired. Once the Channel is rearmed, the

system is ready to report any new alarm. The system

bypasses any detectors that are still violated.

Notes:

If a Final Exit Zone is triggered, Channel 3 becomes

active at the end of the Programmed Entry time.

Send Tamper as Burg

When using SIA reporting this option allows you to

program the control unit to send tampers as burglary

alarms.

If you select Disabled, (the default) then the control unit

sends all SIA messages as specified in

Reporting, Alarms,

SIA Report Mode

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 83 84

Brak uwag

Cooper Security Homelink 75 Podręcznik Użytkownika Strona 65