Cooper Security Homelink 75 Podręcznik Użytkownika Pobierz pdf (Strona 48)

Programming Reference - System Options 7510r

Page 44

Jamming Detection

The control unit can detect interfering (or "jamming")

radio signals. To enable jamming detection select

System

Options, Jamming.

If the control unit detects jamming once you have

enabled this option then the display shows an Alert

message for the user.

Batt Load Test

A battery load test is an extra test that the control unit

can carry out to test the health of the internal back-up

batteries.

When enabled, if mains power is present then the control

unit tests the ability of the batteries to deliver current

every 23 hours or on unsetting the system. (If the control

unit is communicating or playing/recording speech then

the control unit will delay the test until those activities

are finished.)

If mains power is absent then the control unit carries out

the test as soon as mains power is restored.

If battery load test is disabled the control unit carries out

other, less demanding, tests hourly or on exit from the

Installer Menu.

Siren in Part Set

This option allows you to prevent the siren from sounding

if there is an alarm during a part set.

Force Set

You may wish to allow the user to set the alarm system

when one or more of the detectors are not working or are

open (active).

Note: If you enable “Force Set” then the system does not

comply with EN50131.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

Brak uwag

Cooper Security Homelink 75 Podręcznik Użytkownika Strona 48