Cooper Security i-on160EX Instrukcja Użytkownika Pobierz pdf (Strona 97)

i-on40 & i-onEX Range 4. Administration

Page 91

14. Press .

There are two options to

“Latched”.

“Yes”. The output stays on

until a user deliberately turns

it off. In addition, you can

program the output to come

on and go off at fixed times

(see the next section).

“No”. The output goes on when

a user turns it on, but then

goes off again after a set time.

You can program the length of

time the output remains on.





15. Press  or  to select the

option you wish to use.

For example:





16. Press  to confirm your choice.

The keypad gives a double

“beep” confirmation tone. The

keypad display shows:





To Program Duration Times for non-Latched Outputs

First make sure that the output you wish to use is programmed

as Latched=No (see steps 1 to 16 starting on page 89).

17. Press  until the display

shows:





18. Press .

The display shows the length

of time the output will stay

turned on (in seconds).





19. Key in the number of seconds

that you want the output to stay

on. The maximum is 999s.





1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 121 122

Komentarze do niniejszej Instrukcji

Brak uwag

Cooper Security i-on160EX Instrukcja Użytkownika Strona 97

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Cooper Security i-on160EX