Cooper Security 9751 Przewodnik Instalacji Pobierz pdf (Strona 77)

4. Programming

496792 71

Downloader Telephone Numbers (Commands 118/119)

Use this option to program up to two separate, 31-digit telephone numbers

that the system will use during downloading. When a connection has been

made, the remote PC operator selects the telephone number which the

control unit will call back to (for example home or office).

You can use the A key to insert a pause (four seconds).

To enter a number:

1. Enter programming mode (if you are not already there).

2. Key in 118 (or 119) at the keypad.

The display shows (for example):

3. Press .

3. Key in the digits of the number. If necessary press D to move the cursor

to the left to edit or delete the number. Press C to move the cursor to

the right.

The display shows (for example):

4. Press .

The system stores the number.

Third Downloader Telephone Number (Commands 120)

Use this option to enable Downloader to use a third callback number (inde-

pendent of Commands 118 and 119). Before the Downloader has made a

connection, the remote PC operator keys in the third callback number and

<Downloader> transmits it to the control unit. The control unit then uses that

number to call back to the remote PC.

Key in Option 0 to disable the third callback number, or option 1 to enable it.

Fast Format Channels (Command 121)

If you selected Fast Format reporting type in Command 103 then you can

use Command 121 to allocate one of the following events to each of the 8

channels:

00 Not used 11 AC Fail

01 Fire 12 Tamper Alarm (Day tamper)

02 PA 13 Open (see note 1)

03 Burglar 14 Close (see note 1)

04 Open/Close 15 Zone Omitted (see note 2)

05 Alarm Abort 16 Medical Assistance

06 Technical Alarm 17 Key Box

07 Alarm Confirmation 18 Anti Mask

08 RF Low Battery 19 Smoke Detector

09 Supervision Loss 20 Comms Acknowledge

10 RF Jamming

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 95 96

Brak uwag

Cooper Security 9751 Przewodnik Instalacji Strona 77