Cooper Security i-on 16 Podręcznik Użytkownika Pobierz pdf (Strona 33)

i-on30EX

Page 29

12V Bell output

voltage range

10±0.5V to 13.8V

Max p-to-p ripple

voltage:

0.5V

Standby Battery:

12V, 7Ah sealed lead

acid (not supplied).

„Low battery‟ fault

at:

< 12V

Aux power output

fault at:

< 9V

Deep discharge

protection at:

10±0.5V

Serviceable

components:

Mains fuse: 250mA

(T)

Standby time:

See “Power

Availability” on page

8.

Electromagnetic

Compatibility

Immunity

Conforms to EN50130-4.

Emissions

Conforms to EN61000-6-3.

Outputs

O/P 1,

Bell,

Strobe

Open collector transistor,

+12VDC when inactive, 0V

when active. 500mA max.

Plug-by O/P

1-12

Open collector transistor

+12VDC when inactive, 0V

when active, 50mA max.

LS

(loudspeaker)

Min impedance 16 Ohm per

output, current

consumption = 280mA in

alarm.

Sounder Volume Levels (at 1m)

i-kp01 (at max volume)

70dB

Expander piezo sounder

70dB

Panel/Expander 16 Ohm

loudspeaker

93dB

Fuses

The control unit has a replaceable T250mA

mains fuse.

Electrical Safety

Conforms to EN60950-1.

Other

If you wish to connect the i-on30EX control

unit to a PC using the USB port then make

sure that the cables have the following

specifications:

USB

Mini-B plug for control unit

end, USB-A for PC end.

Max length 3m.

Radio Expander and Keypads

Radio

Operating frequency

868.6625MHz Narrowband.

EN 300 220-3.

EN 300 330-2

Transmitter

range

The range of the

transmitters compatible

with this control unit

depends on the

environment in which they

are installed. As a

guideline, most

transmitters will work at in

excess of 200m range in

free space conditions.

Compliance Statements

The i-on30EX is compliant with EN50130-5

environmental class II.

When fitted with radio devices the i-on30EX

is capable of compliance with EN50131 at

Grade 2.

The built in communicator is compliant with

EN50136-1 as an ATS2 communicator.

At Grade 2 the built in communicator

provides a compliant communicator for the

i-on30EX provided that:

a) It is connected in accordance with the

installation instructions.

b) The connected PSTN is functioning

normally.

When using its built in communicator this

product provides options A, B and C at

Grade 2 as noted in Table 10 of EN50131-

1:2006+A1:2009.

If the installer selects a non-compliant

configuration then they must remove or

adjust compliance labelling

1 2 ... 28 29 30 31 32 33 34 35 36

Komentarze do niniejszej Instrukcji

Brak uwag