Cooper Security 9751 Instrukcja Instalacji Pobierz pdf (Strona 103)

4. Programming

496964 Page 95

103: Reporting Type

The system supports several message formats for communications:

Option

0 Scancom Fast Format (FF)

1 Contact ID (CID)

2 Scancom SIA Level I (SIAI)

3 Scancom SIA Level II (SIAII) – this does not send time and date

4 Scancom SIA Level 3 (SIA3)

5 Extended Scancom SIA Level 3 (XSIA3)

6 Home "beep" (Home)

Option 6 is not a particular message format. What it means is that the

communicator dials a number and sends a "beep" down the line. This does

not allow a complex message to be sent but means that the person answering

the call needs no special equipment to decode the message. The number of

times the communicator repeats the Home "beep" is set with Command 186.

For the 9851 only, the receiver can press "5" on the telephone keypad to

acknowledge the alarm and terminate the series of calls.

104: Not used

This command is not used.

105: Static Test Call

With static testing, the control unit makes test calls at fixed times or intervals;

alternatively, you can use Command 108 (see page 97) to set up a dynamic

test call for 24 hours after the last communication.

To disable static test calls, key in 00.

To make static test calls at a regular time, you have two options:

Ann To make a static test call at a set time every day, press A and then key in

a number between 01 and 24 to select the time for the call. For example,

key in 18 to program the control unit to make a call at 6.00pm every day.

Bnn To make a static test call on a set day of every month, press B and then

key in a number between 01 and 28 to select the day for the call. For

example, key in 22 to program the control unit to make a call on the 22

day of every month. The call will be made at 1.00am on the selected day.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 147 148

Brak uwag

Cooper Security 9751 Instrukcja Instalacji Strona 103