Cooper Security 9751 Instrukcja Instalacji Pobierz pdf (Strona 78)

4. Programming

Page 70 496964

24: Show Control Unit Account Name

An ARC can use Downloader to program an account name into the control

unit. While the control unit is in programming mode, you can display the

account name from the keypad. To do this key in 24Y. Press X to return to

programming mode.

25: Internal Sounder Delay and Duration

Option 0 of this Command makes the internal sounder use the external Bell

Delay and Duration times. Option 1 makes the internal sounder continue after

the external Bell Delay expires.

26: Internal Sounder Delay on Entry

This Command controls the time at which internal sounders operate in

response to an entry alarm.

Option 1 (the default) introduces a delay to allow silent communications when

an entry alarm is triggered; this is required by some police forces. This option

is valid only when:

Alarm Abort is Off (Command 36)

Bell Delay is not zero (Command 41)

Dual Ply is Off (Command 86)

Alarm Confirm is Off (Command 89)

If you select option 1, the control unit starts the internal sounders at the same

time as the external sounders (after any Bell Delay) if an intruder strays from

the Entry Route or the entry time expires.

If you select option 0, the control unit starts the internal sounders immediately

an intruder strays from the Entry Route or the entry time expires.

27: Exit Fault External Sounder

This command controls what happens when an exit timer completes and a

zone is still violated (for example, when a door is not shut).

Option

0 System operates the internal sounders only (default).

1 System operates both internal and external sounders.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 147 148

Brak uwag

Cooper Security 9751 Instrukcja Instalacji Strona 78