Cooper Security 9751 Instrukcja Instalacji Pobierz pdf (Strona 110)

4. Programming

Page 102 496964

122: Communication Acknowledge

This Command is available only if Country is set to Ireland (Command 0,

option X1). In addition, option 1 is effective only if Scancom Fast Format is

selected (Command 103, option 0).

To enable Communication Acknowledge, select option 1. In this mode, when

the communicator has called the ARC and received an acknowledgement, the

keypad displays the message "Call your CS" and emits a "beep" for 10

seconds when the system is unset or disarmed. To clear the display, the user

must enter a valid access code.

If Fast Format communications are programmed with Channel 3 for burglary

(using Command 193), the control unit adds a 20-second delay before making

an alarm call.

To disable Communication Acknowledge, select option 0.

123: Report Restores

This Command is effective only if Scancom Fast Format is selected

(Command 103, option 0).

Option

0 Restore off. The system does not communicate restores.

1 Restore on. The system communicates restores.

124: Reverse Open/Closed

Note: This Command is normally used in France.

Selecting option 1 in this Command reverses the sense of the Open/Close

Fast Format channel. It is effective only if Scancom Fast Format is selected

(Command 103, option 0) and does not affect the separate Open and Close

channels.

Option 0 Option 1

On setting system code 4 code 2

On unsetting system code 2 code 4

125: No Close Signal (not 9751)

Note: This Command is required for Belgian BVVO approval.

This Command is effective only if Scancom Fast Format is selected

(Command 103, option 0). When option 1 is selected, the control unit does

not transmit a Close signal if the user has omitted two or more zones.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 147 148

Brak uwag

Cooper Security 9751 Instrukcja Instalacji Strona 110