Cooper Security 9751 Podręcznik Użytkownika Pobierz pdf (Strona 65)

2. Programming Commands

497096, issue 3 Page 59

159: Invert Plug-by Outputs

By default, plug-by outputs have a positive voltage when inactive and this is

removed when the output is active. This command inverts that logic so that a

positive voltage is applied when the output is active.

Option

0 +ve removed to trigger (default): the output is positive when inactive

and goes to zero when active.

1 +ve applied to trigger: the output floats when inactive and goes

positive when active.

160: Confirmed Alarm Timer

Note: Set Alarm Confirmation (Command 89) to 1 to access this command.

This command controls a timer, which starts when an alarm is triggered for

the first time. If a second alarm is triggered before the timer expires, the

control unit transmits a confirmed alarm to the Alarm Receiving Centre (ARC).

You can set the timer to any value between 001 and 999 minutes (default 30).

Note: Compliance with DD 243: 2004 (see page 83) requires that Command 160 is set to

a value of 30 to 60 minutes.

161: Internal Sounder on Confirmed or Unconfirmed Alarm

Note: Set Alarm Confirmation (Command 89) to 1 or 2 to access this command.

This command selects whether the control unit will operate the internal

sounder for a confirmed alarm or for an unconfirmed alarm. In a partitioned

system, the internal sounder is available only for Partition A; other partitions

use keypad sounders only.

Option

0 Control unit operates the internal sounder for a confirmed or

unconfirmed alarm (default).

1 Control unit operates the internal sounder only for a confirmed alarm.

Note: Compliance with DD 243: 2004 (see page 83) requires that Command 161 is set to 0.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 95 96

Brak uwag

Cooper Security 9751 Podręcznik Użytkownika Strona 65