Cooper Security M2000 Podręcznik Użytkownika Pobierz pdf (Strona 44)

Engineer Menu 1-3 Engineering Manual

02 – Unconf Reset

If you select this attribute, an engineer or remote reset code must be entered to reset the

system after an unconfirmed alarm (page 89) has been sounding in the selected wards for

at least the period specified by Abort Delay (page 64). If you deselect this option, any user

whose code is assigned to the ward can reset the unconfirmed alarm. See also the Remote

Reset attribute (page 36).

03 – Tamper Reset

If you select this attribute, an engineer or remote reset code must be entered to reset the

system after a tamper alarm occurs at a zone in the selected wards while the system is

unset. If you deselect this option, any user who has access to the ward can reset the alarm.

See also the Remote Reset attribute (page 36).

04 – Remote Reset

This is relevant only if the Conf reset, Unconf Reset or Tamper Reset attribute is set (see

above). The Remote Reset attribute enables the panel to generate a code when resetting

the system after an alarm in the selected wards. The user contacts an Alarm Receiving

Centre (ARC) with the code, who (if satisfied with the caller's authority) return a one-off

remote reset code, which the user enters to reset the panel. The

User's Guide

describes

how to enter the remote reset code.

The algorithm used to generate the remote reset code is determined by the Reset Alg

option (page 65). Contact your ARC to obtain the correct algorithm number.

05 – Panel Tamper

The control panel lid tamper can be assigned to any combination of wards. If a panel

tamper occurs, keypads in the same ward will sound (see page 22), and Tamper outputs

associated with the same ward (see page 55) will activate.

See also Tampers as Alarm / Tampers as Tamps (page 91).

06 – Panel Speaker

The control panel speaker can be assigned to any combination of wards. Assigning the

speaker to the correct wards ensures that the sounders operate only when the relevant

ward(s) require a sound (e.g. for an alarm, entry or exit sound).

07 – Aux/Bell Tamp

The auxiliary and bell box tamper input can be assigned to any combination of wards. If a

bell tamper occurs, keypads in the same ward will sound (see page 22), and Tamper

outputs associated with the same ward (see page 55) will activate.

See also Tampers as Alarm / Tampers as Tamps (page 91).

08 – Payment Timer

The payment timer can be assigned to any combination of wards. When the Payment Time

(page 66) expires, the selected wards will require an engineer or remote reset (see the

User's Guide

) before the wards can be set.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 179 180

Brak uwag

Cooper Security M2000 Podręcznik Użytkownika Strona 44