Cooper Security M2000 Podręcznik Użytkownika Pobierz pdf (Strona 55)

Engineering Manual Engineer Menu 1-4

036 – Service Required

Activates when the Service Time (page 64) has expired; deactivates when the engineer

code is entered.

037 – Reset Required

Activates when the system requires an engineer or remote reset; deactivates when the

system is reset either by the engineer or by a remote reset.

038 – Strobe On Set

Activates when there is an alarm, and deactivates when the alarm is reset by the user. This

output is also active for 10 seconds after a user sets the system.

039 – Duress Alarm

Activates when a duress code is entered (as set up in User option 2-4); deactivates when

the duress alarm is reset.

040 – System Part Set

Activates when not all wards are set; deactivates when all wards are set or unset.

041 – LockSet Unlocked

Active when a Lock Set zone (page 25) is unlocked; deactivates when all Lock Set zones on

the system are locked.

042 – Set Failed

Activates when any ward fails to set (e.g. because a zone is active); deactivates when the

set fail condition is reset.

043 – Shunt Code

If the output is latched, the output activates for 2 seconds when a shunt code (as set up in

User option 2-4) is entered. If the output is pulsed, it activates for the duration of the

pulse.

044 – Random Output On

Activates randomly (between 5 and 60 minutes).

045 – Modem Lockout

Activates when the modem is locked-out (four failed attempts); deactivates when a

Manager user code is entered or after 4 hours.

046 – Aux/Bell Tamper

Activates when the bell tamper is triggered; deactivates when the alarm is reset.

047 – Panel Lid Tamper

Activates when the panel lid tamper is activated; deactivates when the alarm is reset.

048 – Chime Mimic

Activates for 2 seconds when any zone with a Chime Tone attribute (page 29) is activated,

if chimes are enabled in User option 1-5.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 179 180

Brak uwag

Cooper Security M2000 Podręcznik Użytkownika Strona 55