Cooper Security M2000 Podręcznik Użytkownika Pobierz pdf (Strona 79)

Engineering Manual Engineer Menu 1-5

Step 1 – Select an Auto Set

Press | or ¬ to select an Auto Set timer. If you wish, you can key in the number of the Auto Set

timer to select it directly (use leading zeroes for timers 1 to 9). Once you see the required Auto

Set timer on the display you can show a summary of its details by pressing r repeatedly.

Press [ to start editing the timer.

(At this point, if you do not wish to key in a description, you can skip to step 3 by pressing |.)

Step 2 – Key in the Auto Set Description

When the bottom line of the screen shows “Description” press [ once more.

Key in the text of the description. See Appendix A for instructions on how to key in text. When

the text is complete, press [. Press | to move on to Set Time/Days.

Step 3 – Key in Set Time/Days

If the bottom line of the screen shows “## ### – ## ###” then the timer is disabled. Press [ to

start editing the setting time.

Key in the start of the setting time in 24 hour format (hours then minutes). Press [ to save changes.

Press any number 1 to 7 in order to specify the days of the week on which to start setting. Note that

1 = Sunday, 2 = Monday and so on until 7 = Saturday. If you wish to specify every day of the week

press 9. If you wish to clear all the days of the week press 0. Press [ to save your changes.

Step 4 – Key In the Unset Time/Days

Key in the unsetting time in 24 hour format (hours then minutes). Press [ to save changes.

Press any number 1 to 7 to specify the days of the week on which to unset (see step 3).

Press [ to save your changes.

Step 5 – Select Wards.

Key in any number 1 to 8 to specify wards 1 to 8. The display shows a “*” for wards that will not

set. Press [ to save your changes.

Step 6 – Select Exceptions

Press | to move on to selecting Exceptions. The bottom of the display shows the number of

Exceptions currently allocated to the Auto Set.

Press [ to change the Exceptions allocated to the current Auto Set timer. The top right corner

of the display shows “No” if the Exception does not apply to the Auto Set timer, and “Yes” if it

does. (Press r if you want to see a description of the Exception.)

Press | to select the Exception you wish to apply.

Press [ to display a cursor next to the “No”.

Press r to change the “No” to a “Yes”. (If you change your mind press r again.). Press [ to

save your changes.

Press ] to leave applying Exceptions. Press ] again if you have finished editing the current

Auto Set timer.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 179 180

Brak uwag

Cooper Security M2000 Podręcznik Użytkownika Strona 79