Cooper Security M2000 Podręcznik Użytkownika Pobierz pdf (Strona 99)

Engineering Manual Engineer Menu 1-9

6 – Confirm 2 Zones / Confirm 1 Zone

These options are relevant only if you have selected Confirmation On and After Entry Yes.

Confirm 2 Zones (default) – A confirmed alarm is generated if the intruder activates two

additional zones after the Entry Delay timer (page 61) expires. If the control unit is in alarm

before the user starts the Entry Delay timer, only one subsequent zone violation is

required.

Select this option if you are installing a DD243:2002 para 6.4.5 compliant system

and the user must unset the system with a proximity detector (“Portable ACE”).

Confirm 1 Zone – A confirmed alarm is generated if the intruder activates one additional

zone after the Entry Delay timer (page 61) expires. This option does not comply with

DD243:2002.

Option 1-9-3: Choosing EN50131 Configuration Options

(For defaults see page 133.)

01 – 4 Digit Codes / 6 Digit Codes

4 Digit Codes – All system user (access) codes are four digits.

6 Digit Codes – All user (access) codes are six digits. When using six-digit user codes, the

default engineer code is 123400 and the default manager code is 567800.

)

You cannot change this setting if the engineer or default manager (user 01) code has been

changed, or any other user code has been set up in User option 2-4. Users can be deleted

using option 2-7-3-7 (page 131) and 2-7-3-8 (page 132).

02 – Internal Sounder / Local Sounder

Internal Sounder– If an alarm occurs while the Entry Delay timer (page 61) is running, both

the extension speaker and keypad sounders operate for 30 seconds. Once the 30-second

period has expired, a full alarm occurs (page 22), unless overridden by option 1-8-4 (page

83).

Local Sounder – Operation is the same as above, but external sounders and the strobe

also operate for the first 30 seconds.

03 – Instant Alarm / Delayed Alarm

Instant Alarm– Causes system and ward Alarm outputs (page 44 and 54) to activate

immediately a full alarm is generated by the Entry Delay timer (page 61) expiring.

Delayed Alarm – Causes system and ward Alarm outputs to be delayed by a further 30

seconds.

04 – Tampers As Alarm / Tampers As Tamps

Tampers As Alarm – If there is a tamper condition when the system is set, the control unit

will:

Communicate an alarm (CID code 130, SIA code BA) message to the Alarm Receiving

Centre (ARC). This depends on the communicator format you select if you choose to

employ the on-board modem.

Trigger system, ward and zone outputs of type "Alarm" and "Tamper Alarm" (or "Tamper").

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 179 180

Brak uwag

Cooper Security M2000 Podręcznik Użytkownika Strona 99